Category Archives: Motorcycles

Parts Are Arriving, Let the Build Begin!

Early September…

Parts from BRP (Billet Racing Products) and Dirt Tricks await on the porch,

then Touratech and Scotts Performance Products show up.

It’s like Christmas!

Sprockets, Triple clamp and more…

Steering stabilizer

Install goes smooth and easy.

First was the upper triple with Scotts Stabilizer mount and bar risers from BRP.The risers are rubber mounted to help dampen vibrations.

Scotts Stabilizer installed.

There are a few stabilizers available for the bike but the only choice was Scotts. I’m not much of a fan of heavy damping so with the Scotts I can set the high speed circuit for the heavy hits and set the low speed with very little damping.

BRP makes a chain guide that is just awesome. The stockers have shown to be susceptible to heavy abuse and the Dakar will through the worst at it so going with the BRP was a no brainer. Easy to install and should last longer than the Dakar and then some!

Dirt Tricks Ironman Sprockets are known to be tough, just what is need for the Dakar!

It was recommended to me to try a 43 rear as it worked for Ty Davis’s Team in the V2R. After a little testing it worked great for high top speed with out over revving the engine but a little to tall for sand and the technical stuff. I’ll be ordering another sprocket in the 47-48 range and then test some more.

Advertisements

More Bikes!

Late August…

Another TXC 449 and a TE 449 arrive. A little later than expected but they are here and it’s time to get busy.

2011 TE 449

Making the trip home…

It’s time to build but I’d rather ride!

TXC 449 and TE 449 home in the garage


Prepping the New TXC 449

The new Husqvarna TXC 449 needed little prep out of the create to fire up and ride. Install the front wheel, attach handle bars, charge and install the battery. That’s it ready to go! Of course I had to install the Akrapovic pipe and power plug right from the start.


The Bikes Are Starting to Arrive!

Husqvarna TXC 449

Many people have been inquiring about which bike I will be riding in the 2012 Dakar Rally.  Some of you may know that I work for the BMW Performance Center in Greer, SC.  Since BMW no longer offers a current model compatible with the new regulations and I would like to stay within the BMW Group, I have partnered with Husqvarna Motorcycles NA to showcase the 449 model line.

Today I received the first of three Husqvarna bikes, a TXC 449.  Another TXC and a TE will be arriving shortly.  We will be combining the best of both the TE and TXC to create the TE 449 Rally.  The plan is to build one race bike, disassemble one bike for spares, and have one test and practice bike remaining.

I have a lot of work to do between now and mid-October and will update you on the build process as it progresses.  Check out the photos page for more proof.